b_logo.gif (1588 bytes)      Return to first Turntable Page

    "this turntable will be used for commercial re-mastering projects from 78-rpm records material"  -  satisfied customer

"Never have my records sounded so good, so many thanks. Many many thanks" -  another satisfied customer


REK-O-KUT CVS-16

CVS-16 Spec's

USA & Canada:  $725.00

Other:  $749.00

Plays 16" Records

AUDIOPHILE QUALITY

Shipping

 East of Miss: $20.00

West of Miss: $27.00

 

Larger Image

In 1960, there was a CVS-12, which only fit records up to 12."  The 50th  Anniversary Edition REK-O-KUT CVS-16 is a fully manual 33/45/78 RPM turntable with a continuously variable and calibrated "78" range of from 62 to 94 rpm.  It accepts records up to 16" inches in diameter. 

The high - torque, direct-drive motor provides fast start and stop braking.  It can play in reverse.

The high - torque, direct-drive motor provides fast start and stop braking.  It can play in reverse.  A switch is provided which permits playing vertical cut records such as World Transcriptions and Edison records.

Supplied with dust cover, slip mat, and our 12-speed Super Strobe for speeds from 68.5 to 90 rpm. Not supplied with phono cartridge or styli. These must be purchased separately. The CVS -16 is recommended for both audiophile and vintage records


REK-O-KUT RONDINE 3

RONDINE 3 Spec's

USA & Canada:  $1,395.00

Other:  $1,445.00

Plays 17" Records

AUDIOPHILE QUALITY

SMALL FOOTPRINT

Shipping

 East of Miss: $19.00

West of Miss: $27.00

 

Step-Up S-240 Fluid damped  arm - add $150.00

READ REVIEWS

Larger Image     Cover Closed Image

The RONDINE 3 provides 33, 45, and 78 rpm and nine other fixed speeds for vintage discs and half-speed mastering.  Its small DC belt-drive motor and Lo-Noise power supply results in very low rumble and ultra-low hum.  Arm height is adjustable for all discs.

The spindle is removable for correcting eccentric records.  The Delrin platter is similar in composition to the actual discs played and provides them with excellent dampening, resulting in neutral sound. 

Its large diameter spindle bearing results in both low friction and low noise.  The Rek-O-Kut TranScribe low-friction arm is longer than standard arms and provides more accurate tracking of all records.  Suspension is provided by four vibration absorbent feet.  Vertical cut discs are playable with a separately purchased, special headshell/cartridge.

Supplied with dust cover, and 12-speed Super Strobe for speeds from 68.5 to 90 rpm.  Not supplied with phono cartridge or styli. These must be purchased separately.  Recommended for both audiophile and vintage records.


Rek-O-Kut
T3378

T3378 Specs

USA & Canada:  $995.00

Other:  $1049.00
(115 VAC, 60 Hz only)

Shipping

East of Miss: $17.00

West of Miss: $25.00

 

Step-Up S-240 Fluid damped  arm - add $150.00

 

 

 

 

 

 

COMING EARLY SUMMER

Larger Image     With Transcription Disc

The T3378 is based on the proven Rondine 3, but with features delivering a more economical price.  The T3378 features the two most used speeds of 33 and 78 rpm and will fit 16 inch transcription records.  Its low torque Hurst USA AC motor and same fine spindle bearing results in very low rumble.  Easy speed change by moving belt on motor pulley.  Arm height is adjustable for all discs.

The spindle is removable for correcting eccentric records.  The Delrin platter is similar in composition to the actual discs played and provides them with excellent dampening, resulting in neutral sound. 

Its large diameter spindle bearing results in both low friction and low noise.  The Rek-O-Kut TranScribe low-friction arm is longer than standard arms and provides more accurate tracking of all records.  Suspension is provided by four vibration absorbent feet.  Vertical cut discs are playable with a separately purchased, special headshell/cartridge.

Not supplied with dust cover, phono cartridge or styli. These must be purchased separately.  Recommended for both audiophile and vintage records.


Rek-O-Kut
Troubadour

Troubadour Specs

USA & Canada:  $2,000.00

Other:  $2075.00

Shipping

East of Miss: $20.00

West of Miss: $28.00

 

 

 

 

 

 

 

COMING EARLY SUMMER

The Troubadour is an all-new design, loosely based on the proven suspended chassis designs of the 1960's.  The Troubador features 6 speeds,  33, 45, 76, 78, 80 and 90 rpm and will fit any sized record up to 20 inches in diameter, including the common16 inch radio broadcast transcription.  Its low torque European-made DC motor, massive platter and precision spindle bearing results in extremely low rumble.  Easy speed change is by a single knob.  The pitch control can correct almost any speed problem.  Arm height is adjustable for all discs.

The spindle is removable for correcting eccentric records.  The acrylic platter is similar in composition to the actual discs played and provides them with excellent dampening, resulting in neutral sound. 

Its large diameter spindle bearing results in both low friction and low noise.  The Rek-O-Kut S-260 MKII low-friction, extra-long arm is much longer than conventional arms and provides much more accurate tracking of any record.  The entire playback mechanism is isoloated by vibration absorbent pods.  Vertical cut discs are playable with a separately purchased, special headshell/cartridge.

The base is made of furniture-grade select hardwoods, and beautifully finished by craftsmen.

Not supplied with dust cover, phono cartridge or styli. These must be purchased separately.  Recommended for both audiophile and vintage records.


130pix.gif (51 bytes)130pix.gif (51 bytes)130pix.gif (56 bytes) OTHER TURNTABLES